Quick Start; Control Panel - Selecline 600103364 Manual De Utilización

QUICK START

Note: Prior to use, ensure the tumble dryer is installed properly.
EN
1. Before drying
Plug in to the mains electricity supply.
2. Drying
Turn on.
3. After drying
Note: After finished drying, the buzzer will beep.
Take the laundry out from the
tumble dryer.

CONTROL PANEL

1. Switch the tumble dryer on by pressing the
2. Select the programme by pressing the
indicator for the desired programme lights up.
3. Press the drying level button (
lights up.
4. Press the Anti-Crease button to activate the Anti-Crease function. The indicator will light up.
5. Press the Start/Pause button to start.
6. To activate the child lock function, press the
3 seconds. The indicator will light up.
7. A buzzer sounds to let you know the programme has finished. Press the
Disconnect the tumble dryer from the mains electricity supply.
8. Clean the lint filter, cabinet and drum. For more information regarding cleaning, refer to <MAINTENANCE AND CLEANING>
section.
Notes:
• The symbol indicates the standard programme, which is the most suitable to dry normal cotton load at rated capacity.
• The Cotton + Standard programme is suitable to dry normal wet cotton laundry and it is the most efficient programme in
terms of energy consumption for drying wet cotton laundry.
1
Load the laundry into the drum.
Select a function of default.
1
Clean the lint filter.
Anti Creas
Anti Crease
On/Off button in.
programme button (
Extra/ Standard/
programme button and the
2
2
Mix/ Cotton/ Synthetic/
Less) repeatedly until the indicator for the desired drying level
drying level button simultaneously for
On/Off button to turn off the tumble dryer.
8
3
Close the door.
Start.
3
Disconnect the tumble dryer
from the mains electricity
supply.
Mix
Cotton
Synthetic
1H
7 KG 7 KG
1H) repeatedly until the