Care And Maintenance - XD COLLECTION XD P279.41 Serie Manual De Instrucciones

4. Setting the alarm
1. In alarm mode,press and hold the MODE button (3) for about 4 seconds to
start setting the alarm:
- Hours
- Minutes
2. Press the UP (6) or DOWN (7) buttons to select the individual values.
3. Press the MODE button (3) to adopt the set value displayed and skip to the
next item.
4. Press the MODE button (3) to save the settings and return to the normal
display.
5. Temperature measurements, maximum/minimum display
1. Press the DOWN button (7) when in any mode to choose between °C (Celsius)
and °F(Fahrenheit).
2. Press the MAX/MIN button (4) to display the maximum or minimum recorded
values for temperature and humidity.
6. alarm
1. In time or calendar mode, press the UP button (6) to switch the alarms on
or off. one of these symbols appears on the display, the relevant functions
are activated.
2. If the alarm is switched on, it will stop going off automatically after about 1
minute or when the SNZ (5) or LIGHT (8) button is pressed. lf you press the SNZ
button (5),the alarm will go off again four times
TEMPERATURE TREND DISPLAY (2)
This display shows the temperature trend over the last 12,6,3, 2 or 1 hour(s),
within a max. range of +/- 1 °C or +/- 5.4°F. It is only for informational
purposes; you can not make any settings on this display.

CARE AND MAINTENANCE

Only clean this product with a slightly damp, lint-free cloth and do not
use aggressive cleaning agents.Make sure that water does not get into
the product.