Sauder Boulevard Cafe Serie Instrucciones De Montaje página 7

Step 1
å
Assemble your unit on a carpeted floor or on the empty carton to avoid scratching your unit or the floor.
å
Separate the EXTENSION SLIDES (2) from the EXTENSION RAILS (1) as shown in the upper diagram below. Be
prepared, the parts are greasy.
å
Fasten the EXTENSION RAILS (1) to the ENDS (B and C). Use twelve 3/8" FLAT HEAD SCREWS (22) through the
exact holes shown.
å
NOTE: For each EXTENSION RAIL, turn a SCREW into the 1
inner cartridge of the EXTENSION RAIL in to find the other two holes that line up with the holes in the END. Turn a
SCREW into each of these holes.
2
Slide the black lever, and pull the SLIDE from the RAIL.
Open end
427345
1
st
1
1
st
B
1
www.sauder.com/service
Look for this icon. It means a video assembly tip is
available at www.sauder.com/service/tips
Find the numbered video or scan the QR code.
hole shown in the enlarged diagram. Then, slide the
st
3/8" FLAT HEAD SCREW
(12 used in this step)
1
1
1
st
C
22
1
st
Open end
1
st
1
7
Page 7