Usb / Configuration / Screensaver - Quality Espresso Q10 EVO Manual De Instrucciones

8.3.10 – USB / CONFIGURATION / SCREENSAVER
The Q10 has been fitted with a USB port, with which users can copy the grinder's configuration data to a USB
-
memory stick and then upload this data onto other grinders. We can also change either of the two main images
which appear on the screen.
For example: Copy configuration data from a USB memory stick to the Grinder.
1. Select the operation to be performed (fig.1). In this example, we will copy the configuration data which we
-
have obtained from another grinder and which has been copied onto a USB memory stick and will be then
copied into our grinder.
2. Confirm the operation (fig. 2)
-
3. Lastly, we will view a screen confirming the operation (fig.3)
-
SELECT
FIGURE 1.
i
- If we try to perform any of the described
operation and the USB memory stick is
not detected, the following screen will
appear.
- CONFIGURATION
- SCREENSAVER PICTURES
- CONFIRM
- MOVE DATA FROM USB TO Q10
- MOVE DATA FROM Q10 TO USB
CONFIRM
FIGURE 2.
30
OPERATION
CONFIRMED
FIGURE 3.
USB NOT DETECTED