Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
EN
1 Handle
2 On/Off switch
3 Appliance head
4 Filter basket
5 Safety float valve
6 Locking hook
7 Tank
8 Suction hose
connector
9 Blow connector
10. Flexible hose
11 3-part suction tube
3
5
13
7
9
10
b
10
12 Combination nozzle
13 Castors
14 Cartridge filter
15 Dirt bag
16 Foam filter
17 Crevice nozzle
18 Battery cover
19 Charger(not include)
20 Battery pack(not
include)
21 Push lock button
22 Suction hose holder
4
18
3
9
4
5
7
6
8
15
8
10
10
11
a
10
c
11
11
DANGER!
The equipment and packaging material are not toys. Do
not let children play with plastic bags, foils or small parts.
There is a danger of swallowing or suffocating!
PROPER USE
The cordless wet and dry vacuum cleaner is designed for
wet and dry vacuuming using the appropriate filter. The
equipment is not suitable for the vacuuming of combus-
tible, explosive or harmful substances.
The equipment is to be used only for its prescribed pur-
pose. Any other use is deemed to be a case of misuse.
The user / operator and not the manufacturer will be liable
for any damage or injuries of any kind caused as a result
of this.
Please note that our equipment has not been designed
for use in commercial, trade or industrial applications.
Our warranty will be voided if the equipment is used in
commercial, trade or industrial businesses or for equiva-
lent purposes.
BEFORE STARTING THE EQUIPMENT
APPLIANCE ASSEMBLY:
Fitting the appliance head (Fig. 1, 4)
The appliance head (3) is fastened to the tank (7) by the
locking hook (6). To remove the appliance head (3), open
the locking hook (6) and remove the appliance head (3).
When fitting the appliance head (3), make sure that the
16
locking hook (6) locks into place correctly.
Fitting the castors (Fig. 5)
Fit the castors (13) into the appropriate mountings on the
underside of the tank (7).
FITTING THE FILTER
Notice!
Never use the wet and dry vacuum cleaner without a filter!
14
Always ensure that the filters are perfectly secure!
Fitting the foam filter (Fig. 6)
For wet-vacuuming, slip the supplied foam filter (16) over
the filter basket.
Assembling the dirt bag (Fig. 7)
For vacuuming fine dry dirt, it is recommended that you fit
12
the dirt bag (15). Slip the dirt bag (15) over the vacuuming
hole. The dirt bag (15) is suitable for dry-vacuuming only.
The dirt bag makes it easier to dispose of the sucked-in
dust.
Fitting the cartridge filter (Fig. 8)
For dry vacuuming, slip the cartridge filter (14) over the
filter cage. The cartridge filter (14) is suitable for dry-va-
cuuming only.
17
FITTING THE SUCTION HOSE (FIG. 3, 9, 10)
Connect the suction hose (10) to the corresponding con-
nector on the wet and dry vacuum cleaner, depending on
the application required.
4
Publicidad
Tabla de contenido
