Setup Steps - VALK GAIA Guia De Instalacion

SETUP STEPS

1
2
LEFT
3
LEFT
GAIA
INSTRUCTION GUIDE
E
D
F
G
B
Back
RIGHT
L
B
Back
RIGHT
C
L
Attach the casters (G) to the base (F). Then put
the gas lift (D) in the base (F) and place the
cover (E).
Identify the left and right armsrests (N) and
install each on its corresponding side of the seat
base (B) using 6 M8X20mm screws (H).
Install the mechanism (C) on the seat base (B)
with 4 M8×20mm screws (H), with the lever
facing the back of the seat. Once the chair is
assembled, you will operate it with your right
hand.
7
EN