EN
24
SAFETY INSTRUCTIONS
•
Before use, check the voltage information on the rating plate and only connect
the device to sockets that correspond to the nominal voltage of the device.
•
If the power cord is damaged, have it replaced by a trained professional.
•
Do not place the fireplace directly under the mains socket.
•
Keep a distance of one metre from combustible materials such as furniture,
curtains or similar.
•
Use the appliance out of the reach of children. Children may only operate the
device under supervision.
•
The appliance is intended for use in the home and similar environments only.
It is not intended for commercial use.
•
Do not use the device if it malfunctions or has been damaged in any way.
•
Repairs may only be carried out by trained specialists.
•
Incorrectly or independently performed repairs pose a risk of injury.
•
Do not run the power cord under carpets or rugs.
•
Make sure that the power cord does not come into contact with sharp edges
or hot surfaces.
•
To prevent overheating, do not cover the fireplace.
•
Do not use the appliance with an external timer, a remote controlled socket or
any other device that automatically turns the fireplace on and off.
•
Do not immerse the device in water or other liquids.
•
Do not use the appliance near bathtubs, showers or swimming pools.
•
Do not use the device outdoors.
•
Do not use the device with wet hands.
•
Do not use the appliance on or near hot surfaces
•
Do not use the device with a damaged power cord.
•
Before cleaning, unplug the appliance from the wall outlet and allow it to cool
completely.
•
Do not use abrasive cleaners for cleaning.