Type two:
1) Tear off the package of the paper core and put it inside the filtration bucket
2) Pull out the filtration tuck net
3) Match the paper core correctly inside and screw down it in sequence, then put the cover of filtration bucket on
top.
Type three:
Remove the cover on the filter box, put the filter paper in and out, then screw the cover and locknut.
Type four:
1)
Remove the cover on the filter, and screw the core paper filter out.
2)
Repeatedly clean the core paper filter with water.
3)
Put the core paper filter back to use after dry out.
4)
Change the core paper filter half a year once, depends on the high quality of water; lifetime of paper filter can
be properly extended.
5)
Change a new paper filter, take out a new one and tear out the package of the paper core and put it inside the
filtration bucket.
6)
Match the paper core correctly inside and screw it down in sequence, then put the cover of filtration bucket on
top.
Notice: Different spa model with standard configuration will be equipped with one of these filtrations, please install
and clean the paper core in accord with the proper filtration system you purchase.
Remove the locknut according to the picture show direction
22