Sauder Boulevard Cafe Serie Instrucciones De Montaje página 24

Step 19
Fasten the SHORT BACK (Q) to the SMALL WIRE BACK (R). Use two BLACK 1-3/4" PAN HEAD SCREWS (37).
å
NOTE: Start all of the hex head SCREWS before completely tightening any of them.
å
Fasten the SMALL WIRE BACK (R) to the SMALL LEFT END (S). Use two BLACK 1-3/8" HEX HEAD SCREWS (39) and
å
the L-WRENCH (36).
Fasten the LEFT BOTTOM (U) to the SMALL LEFT END (S). Use three BLACK 3/8" HEX HEAD
å
SCREWS (47) and the L-WRENCH (36).
Fasten the SHORT LEFT TUBES (T) to the SMALL LEFT END (S). Use two BLACK 1-3/8" HEX HEAD SCREWS (47)
å
and the L-WRENCH (36).
Tighten all of the hex head SCREWS with the L-WRENCH.
å
BLACK 1-3/4" PAN HEAD SCREW
(2 used in this step)
BLACK 1-3/8" HEX HEAD SCREW
(4 used in this step)
Page 24
37
T
S
39
www.sauder.com/service
Q
T
R
36
R
U
47
BLACK 3/8" HEX HEAD SCREW
(3 used in this step)
420650