Aux Playback - Würth 0837 900 150 Instrucciones De Uso Originales

AUX Playback

Connecting another non-Bluetooth®-capable playback device to the
speaker, requires an AUX cable (not supplied).
► Connect the AUX connector [7] at the speaker to the audio connector at
your playback device.
✓ The speaker begins to play sound.
► Press key [3] or [4] to skip one track forward or backward.
Note
The keys [2], [3] and [4] have no function during AUX playback.
The volume is adjusted via the playback device.
Intelligent quick charge
Charging can be performed in standby mode or when the device is
switched off.
► Plug the supplied USB charging cable [10] into the Micro-USB port [8]
of the speaker.
► Plug the other end of the cable into the USB port of the computer or of a
USB charger (not supplied).
✓ The LED display [9] of the loudspeaker lights up in red.
✓ As soon as the speaker battery is fully charged, the red LED display [9]
goes out.
21 21