Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
TECHNICAL DATA
Range: 4 sides with 90 degrees
Resolution: 0,1 degree
Batteries: 3V CR2032 (x3)
Working temperature: 0°C - 40°C
Relative humidity: 40% - 80%
Dimensions: 152,4 x 50,8 x 33 mm
ATTENTION
Read the operating instructions and all safety instructions contained therein carefully before using the
product. Use the product correctly, with care and only according to the intended purpose. Non-
compliance of the safety instructions may lead to damage, personal injury and to termination of the
warranty. Keep these instructions in a safe and dry location for future reference. Enclose the
operating instructions when handing over the product to third parties.
INTENDED USE
This digital angle measuring device with an illuminated LCD display is used to measure angles.
It has an acoustic signal when it reaches 0, 10, 20, 30, 40, 50, 60, 70, 80 and 90 degrees and holds
the last measured value in the display if required. The values are also displayed horizontally in
degrees or percent also when overhead measurements. The device allows absolute and relative
measurements and has an automatic switch-off and a low battery indicator.
SAFETY INFORMATIONS
•
Keep children and other persons out of the working area.
•
Do not allow children to play with this tool or its packaging.
•
Keep batteries out of the reach of children.
•
Do not use the tool if parts are missing or damaged.
•
Use the tool for the intended purpose only.
COMPONENTS
1
Button „ON/OFF"
Button Beep "●))"
2
3
Button Degrees/Percent "0%"
4
Button "Calibrate"
5
Button "HOLD"
6
Back side of the unit
7
Battery compartment cover
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Digital Protractor
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 9330
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Publicidad
Tabla de contenido
