Technical Informations - ARDES AR4F14 Manual De Instrucciones

1 - Handle
2 - Function switch
3 - Adjustable thermostat
Technical data indicated on the appliance.
The appliance can emit both cold air and hot air depending upon the
function selected by means of the function switch. Make sure that the
function switch is in the OFF position before connecting
or disconnecting the appliance.
To turn the appliance on, insert the plug in the power outlet, set the
operation switch in the desired position and turn the temperature switch
clockwise to the maximum position.
Once the desired room temperature is reached, turn the handle slowly, in
a counter clockwise direction, until the appliance is turned off.
At this point, the product will automatically restart when the temperature
in the room goes below the set limit.
The appliance is equipped with an automatic turn-off system in case it
falls over accidentally.
This appliance does not require any special maintenance.
Disconnect the plug from the socket and let the appliance cool down well
before cleaning it.
In order to clean the appliance, use a soft or slight damp cloth.
Never use abrasives or chemical solvents.
Do not use very wet substances, liquids or cloths to prevent water from
entering into the apparatus and irreparably damaging it.
NEVER IMMERSE THE APPLIANCE INTO THE WATER.
Dust inside the appliance
Use a vacuum cleaner on the back grid.

Technical informations

Instructions for use
Maintenance
GB
GB
GB
17