LaserLiner AirBreeze 120 Manual De Instrucciones página 11

– Do not lay the mains cable under carpets, floor coverings, or furniture/other devices. Fire risk!
– Take particular care to protect the plug connections to the device and sockets.
– The device is intended for use on a secure, flat surface.
– Risk of overheating! Do not block or cover any of the ventilation openings on the device during operation.
– Do not use in the vicinity of open flames or other heat sources (heating systems, ovens, amplifiers, etc.).
Overheating has a detrimental effect on the service life and can represent a risk of fire.
– Always disconnect the device from the power supply during thunder storms or if the device is left unused for an
extended period of time.
– The mains plug must always be easily accessible.
– When removing a plug from a socket, always pull the plug and never the cable in order to avoid electric shocks
and the risk of fire due to damage.
– Clean the mains plug at regular intervals.
– Ensure the mains plug is always fully inserted into the socket.
– Deposits and connections can lead to short circuits, overheating, and the risk of fire.
– Ensure your hands are dry when handling the mains cable and plug.
– Disconnect the device from the mains immediately if any of the following circumstances occur:
- a switch, the display or a function is no longer working correctly.
- an RCD, circuit breaker or a fuse has blown.
- the mains cable or plug has overheated.
- the device is making unusual noises or vibrations or emitting unusual smells.
- any other unusual responses or defects.
– Disconnect from the mains before changing the filter or cleaning the device.
– Do not operate the air purifier without a filter.
– The filters must be removed from their packaging before fitting.
– The device indicates when the filter needs to be changed but can still be operated normally with this display.
– Typical incorrect uses to be avoided by users:
- Use: - in wet areas (such as bathrooms, sanitary areas)
- as storage, particularly placement of containers filled with liquids.
- in the immediate vicinity of wet objects
- outside the permitted environmental conditions
- outside
- in explosive or flammable atmospheres
- Covering the ventilation openings.
- Inserting conductive objects into the ventilation slots.
- Tampering with or bypassing safety equipment.
– If safety instructions are ignored, this can result in electric shocks, burns and/or severe injury.
!
Observe the safety instructions. Ignoring the safety instructions puts people, the environment and the
product at risk.
AirBreeze 120
EN
11