DeLaval 180 Manual De Instrucciones página 17

English
Switch Power Filter Clean on
Slide setting (1) - downwards
♦ Actuate Power Filter Clean at regular
intervals during vacuuming and after
finishing the vacuuming job.
DeLaval 180
Wet-vacuuming
Fitting rubber lips
Dismantle the strip brush (1)
Mount the rubber squeegees (2)
Note:
The profiled surface of the rubber
squeegees must be on the outside.
Remove the paper filter bag
Insert power plug
Switch on the machine and start
using it
♦ During vacuuming it is not
permitted to ever remove the flat
pleated filter.
♦ The paper filter bag or the
membrane filter
(special accessories) must be
removed whenever vacuuming
wet dirt. The use of a special filter
bag (wet type) is recommended
(see filter systems).
♦ The appliance is not switched off
when the container is full when
non-conducting liquids
(e.g. drilling emulsion, oils and
greases) are handled. The fill level
must be regularly checked and
the container emptied before it is
too full.
Switch Power Filter Clean off
Setting of the slide (1) - upwards
Note:
♦ When vacuuming wet dirt with the
upholstery or the crevice nozzle or if
predominantly water is to be
vacuumed out of a container it is
adviseable to turn the - Power Filter
Clean – operation off. .
♦ The appliance turns itself
automatically off when the max.
liquid level has been reached.
♦ Switch the appliance off and empty
the container.
♦ Clean and dry the flat pleat filter and
the electrodes as well as the
container after finishing wet
vacuuming jobs.
17