PEDIWHIZ TV80038 Manual De Instrucciones página 4

Assembly
• Coarse disc for eliminating calluses
(follow the steps shown in the diagram)
1. Attach the coarse disc to the dead-skin collector by inserting the two tabs on
the edge of the disc into the holes on the edge of the collector.
2. Attach the dead-skin collector to the main section by inserting the shaft on the
main section into the central hole in the collector.
3. Attach the protective ring to the main section by inserting the tabs on the
edge of the ring into the slots on the edge of the main section.
4. Screw the protective ring on anti-clockwise until it cannot be turned any fur-
ther. To remove the ring, unscrew it by turning it clockwise.
5. Put the cap on the main section when you have finished using the device.
Polishing disc
• Remove the coarse disc (which is used for
eliminating calluses) and replace it
with the polishing disc.
• Attach the polishing disc to the main
section by inserting the shaft on the main
section into the central hole in the disc.
4