Safety Precautions - DROP Persia Modo De Empleo

FUNCTIONS OF THE AROMA DIFFUSER
Operation time
- Works for up to six hours.
- The quantity and intensity of the vapour produced
is dependent on the strength of the air flow and the
quantity and temperature of the water used.
- When the diffuser is turned on, the quantity of vapour
produced may initially be lower than normal, but after
a few minutes in operation the flow of vapour will in-
crease and thereafter remain stable.
Turning on the diffuser
- Press the -switch.
OPERATION
Recommendations:
- Always place the diffuser on a flat and stable surfa-
ce.
- Never exceed the maximum level indicated on the
water reservoir.
34
Turning off the diffuser
- Press the -switch continually until the diffuser stops
working.
- If the water reservoir contains too little or no water,
the diffuser will automatically be switched off.
LED-light
- The light and vapour functions are activated together.
Other functions
- Automatic stop function: If the water reservoir con-
tains too little or no water, the diffuser will immediately
and automatically be switched off (even if the unit is
still connected to the electricity supply).
Electricity connection:
- Connect the AC adapter to the diffuser.
OPERATING INSTRUCTIONS
1. 2. 3.
1. Insert the plug into the socket
2. Open the casing 4. Add essential oil

SAFETY PRECAUTIONS

Recommendations to avoid damage or malfunction:
- Never fill the diffuser with more than the maximum of 80 ml of water indicated in the water reservoir.
- Do not turn the diffuser on if the water reservoir is empty.
- Do not touch the ultrasonic vibration plate.
- Only clean the diffuser in accordance with the cleaning instructions detailed below.
- Always disconnect the diffuser during cleaning.
- For hygienic reasons, always pour away any surplus water after use via the discharge side of the reservoir. Wipe
the reservoir and the casing with a clean, dry cloth.
- Essential oils can cause staining. In the event of contact or spillage, immediately wipe up the oil with a clean, dry
cloth.
- Do not allow the vapour to be diffused in the direction of heat sources, air-conditioning units or ventilators.
- Always place the diffuser on a flat and stable surface. Do not place on carpets, beds, or other unsteady surfaces.
- Position the diffuser far enough away from other electronic devices, such as TVs and audio equipment.
- To avoid damage by water seepage, do not tip or tilt the diffuser.
4. 5.
3. Add water 5. Close the casing
6. Turn on the diffuser
6.
35