BEARWARE 304017 Manual página 27

5. Functional scope
The programmable socket thermostat is suitable for controlling the room temper-
ature using heating and cooling devices such as electric heaters, radiators or air
conditioners, thanks to an exact-degree switching.
The device is a temperature-dependent switching socket, which measures the ac-
tual room temperature and regulates it up to the individually adjustable setpoint
value.
6. Initial use
Take the device out of the package and remove all the packaging material. Check
that the product and the components are intact and that the device is working
properly when using it for the first time Connect the thermostat to a properly in-
stalled socket. The device is now ready for use.
6.1 Status LEDs
Status LED Description
Off Thermostat is switched off
Red Thermostat is in standby (socket not active)
Thermostat is active (heating or cooling mode switched on/
Green
socket is active)
7. Basic settings
7.1 Changing between °C / °F
The device should not be active when changing the temperature unit. The LED must
be switched off and the target temperature should not be displayed.
To change between °C and °F, press and hold the "UP" and "DOWN" buttons
simultaneously for about 3 seconds. The corresponding temperature unit now
changes in the display.
English
27