Hella UHL500 Instrucciones De Montaje página 8

EN
USER INSTRUCTIONS
Light modes
The head lamp has 4 diff erent modes. Push to change mode.
1. SMD LED High – Spot
2. SMD LED Low – Spot
3. COB LED – Main Light
4. SMD LED / COB LED in combination – Spot & Main Light
Dimming function
Hold down to activate the dimming function in any mode.
Sensor function
Push in any mode to activate sensor function. Move hand in front of headlamp to
control if function is activated.
LED battery indicator
Low battery = red light
Active sensor function = green light blinking
Charging mode = steady red light
Fully charged = steady green light
Memory function
The head lamp has a memory function. When choosing a mode wait 5 seconds, then
turn off the head lamp. When the head lamp is turned back on, the last selected mode
is active.
Warnings
• Do not stare directly into the light, it can injure your eyes!
• If the product is not used for a long period of time, fully charge before reusing!
• Recharge the battery once every 3 months to assure the battery performance!