HBK RTN/M2 Serie Instrucciones De Montaje página 26

Order number
1-RTN/M2LB33T
1-RTN/M2B33T
Scope of supply
Complete weighing module mounted with stay rod without RTN load cell. For additional
information on the appropriate load cell, please refer to our data sheet RTN...
Notice
Instead of the load cell, a dummy is installed which is able to support loads up to the val­
ues specified above. Please take care you have to lift the mounted tank by min. 10 mm to
replace the dummy with an RTN load cell.
Mounting examples for weighing modules with stay rods
120°
120°
90°
90°
24
Max. capacity
for load cell
33 t
120°
Stay rod
Load introduction
90°
Degree of freedom
Attention: The represented
bearing arrangements con­
sider only weighing‐techni­
cal criteria.
The carrying and stability
90°
must be examined and
guaranteed in each case by
the operator.
Material
galvanized
Version
WITH stay rod
WITHOUT stay rod
RTN/M2
SPECIFICATIONS