HBK RTN/M2 Serie Instrucciones De Montaje página 6

With environmental conditions that cannot be clearly defined, HBK recommends to
provide the load cells and weighing modules with a protective coating which matches
these conditions (after mounting) in order to prevent the influence of aggressive media.
Please take into account the resistance of the cable material and the mounting parts.
Prohibition of own conversions and modifications
The weighing modules must not be modified from the design or safety engineering point
of view except with our express agreement. Any modification shall exclude all liability on
our part for any damage resulting therefrom.
Qualified personnel
These weighing modules are only to be installed by qualified personnel strictly in
accordance with the specifications and with the safety rules and regulations which
follow. It is also essential to observe the appropriate legal and safety regulations for the
application concerned. The same applies to the use of accessories.
Qualified personnel means persons entrusted with the installation, fitting, commissioning
and operation of the product who possess the appropriate qualifications for their
function.
Accident prevention
Although the specified brealing load is several times the full scale value, the relevant
accident prevention regulations from the trade associations must be taken into
consideration.
RTN/M2
4
SAFETY INSTRUCTIONS