LISTENING TO A RECORD
1. Unfasten the clasps on both sides of the main unit to open the cover.
2. Detach the white stylus protector by pressing both sides and pulling straight off the stylus.
3. Set the Function Tuner to "PHONO" position. The Power Indicator will turn on in red.
4. Place a vinyl record on the turntable. Align the turntable spindle to the hole on the record.
Note: Place the 45 RPM adapter on the turntable spindle first if playing a 45 RPM record.
5. Slide the Speed Selector to 33, 45 or 78 to match the play speed of the record.
6. Unlock the Hold Down Clip.
7. Raise the Cue Lever to lift the Tone arm off the Tone arm support.
8. Gently move the Tone arm to the edge of the record (or the starting point of a track).
9. Release the Cue Lever to put the Tonearm onto the record; and the turntable will begin
playback.
10. Turn the VOLUME +/- Tuner to adjust the volume.
11. To pause/stop during playback, raise the Cue Lever to lift the Tonearm off the record.
12. When finished listening:
a. Lift the Tonearm off the record by raising the Cue Lever.
b. Put the Tonearm to its support by hand,
c. Release the Tonearm by putting down the Cue Lever.
d. Lock the Hold Down Clip.
Note:
After you play 78 RPM vinyl record, it will stop in about 60 seconds.
9
2022.07.
26
09:20:03
+08'00'