Setup & Basic Operation; Power Connection - Victor ANDOVER VWRP-3200 Manual De Operación

SETUP & BASIC OPERATION
In the Box:
• 1 x Turntable
• 1 x Power adapter
• 1 x 45 RPM adapter
• 1 x Aux In cable
• 1 x User manual
• 4 x Legs (upper long leg + lower long leg)
• 16 x Screws (for machine feet installation)
Read this user manual before any operation
All the warnings and safety instructions should be followed for your safety. Any improper operation not
included in this manual may cause injuries or damage the product.
Note: All the images and pictures in this manual are for illustration purposes only and may be slightly
different from the actual appearance of the product.
Install the Legs (If Applicable)
1. Assemble each leg by twisting the top part of the leg onto the
bottom part of the leg.
2. Place the unit on a flat, smooth surface, with its bottom upwards.
Be careful the cover stays closed.
3. Align the holes on the leg joints to the holes on bottom of the unit.
4. Use a Phillips screwdriver and screws to secure the legs to the
bottom of the unit.
5. Turn over the unit when finished. Make sure it stands firmly on an
even surface.

Power Connection

1. Use the power adapter in the box to connect the unit to a nearby power outlet.
2. Plug the small end of the adapter into the DC IN Jack on the back of the unit.
3. Insert the metal prongs on the big end of the adapter into a wall outlet.
Note: Only use the power adaptor provided with the unit.
Please contact Customer Service
immediately the if there are any missing
parts or accessories from the package or
the product is damaged. Retain the
original packaging materials for exchange
or return purposes.
8
2022.07.26
09:20:00
+08'00'