Cassette Tape Operation - Victor MOUNMENT VWRP-5000 Manual De Operación

4. Press the STOP/PAIR button to stop recording, and "END-REC" will appear on display. Now
the recording process ends.
Note: If you want to listen the latest record track, just press
automatically.
Erasing Files on the USB Device
1. Insert a USB device into the USB port and play the song you want to delete.
2. Press and hold the RECORD/ERASE button for about two seconds, "ERA" with blinking, and
"ONE" will appear on the display.
3. Press the
a. ERA ONE - erase the current track
b. ERA FOLD - erase all the audio tracks in the entire folder
c. ERA ALL - erase all the audio tracks on the USB device
4. Press the RECORD/ERASE button again to confirm. "ERA WAIT" will appear, and erasing
process starts.
5. When all tracks and folders erased, "NO SONG" will be shown on display.

CASSETTE TAPE OPERATION

1. Set the Function Knob to BT/TAPE position.
2. Insert a recorded cassette with its exposed side facing outwards. Push inwards until a
CLICK sound is heard. Playback will start automatically.
3. During playback, you can lightly press and hold the Eject / Fast Forward button to accelerate
the playing speed and release your finger when the part you want to listen to is found.
4. To stop playback and eject the tape, push the Eject / Fast Forward but ton all the way in
until the tape is ejected.
or button to select:
button if it does not start to play
11