Functional Description - Milwaukee 2448-20 Manual Del Operador

SYMBOLOGY
Volts
Direct Current
WARNING! Keep hands away
WARNING! Risk of electric shock
Always wear eye protection
Read Operator's Manual
UL Listing for Canada and U.S.
US
C

FUNCTIONAL DESCRIPTION

1
6
1. Workpiece contact bracket
2. Trigger
3. Handle
Cat. No. ..................................................... 2448-20
Volts.............................................................. 12 DC
Battery Type .................................................M12™
Charger Type................................................M12™
Staple Type .......... MILWAUKEE 1" Cable Staples
Recommended Ambient
cific charging instructions, read the operator's
manual supplied with your charger and battery.
To remove the battery, push in the release buttons
and pull the battery pack away from the tool.
To insert the battery, slide the pack into the body
of the tool. Make sure it latches securely into place.
may be hazardous.
To reduce the risk of injury, always wear proper
eye protection marked to comply with ANSI Z87.1.
To install fasteners:
1. Remove battery pack.
2. WARNING! Always point the tool away from your-
3. Pinch the magazine latch and and pull magazine
2
4. Insert the fasteners into the magazine channel.
3
5. Push the magazine back in until it snaps closed.
4
To remove fasteners:
1. Remove battery pack.
2. WARNING! Always point the tool away from your-
5
3. Pinch the magazine latch and and pull magazine
4. Remove the fasteners.
4. Battery guage
5. Battery bay
6. Magazine
4
SPECIFICATIONS
Operating Temperature ......................0°F to 125°F
ASSEMBLY
Recharge only with the charger
WARNING
specified for the battery. For spe-
Removing/Inserting the Battery
Always remove the battery pack
WARNING
any time the tool is not in use.
Only use accessories specifically
WARNING
recommended for this tool. Others
Installing/Removing Fasteners
Always remove battery pack before
WARNING
changing or removing fasteners.
self and others when installing fasteners. Failure
to do so could result in injury.
all the way out until the magazine clicks into place.
The fastener legs should point outwards away from
the tool body. WARNING! Use only MILWAUKEE
1" Cable Staples. Other fasteners could result in
tool malfunction, leading to injury.
self and others when installing fasteners. Failure
to do so could result in injury.
all the way out until the magazine clicks into place.