Tool Specific Safety Information; Greenlee Contact Information - Greenlee GATOR EK1550FLX Operación Manual

Tool Specific Safety Warnings
Use the correct tool and accessories for your applica-
tion. The correct tool will do the job better and safer
at the rate for which it was designed. Use of the tool
for operations different from those intended can result
in a hazardous situation.
Before operating this tool, read and understand:
• This operator's manual
• The instructions for any other equipment or
material used with this tool
• Markings on the tool
• Required work site safety procedures
Failure to follow all instructions and warnings may
result in serious injury or death.
• Use proper die, connector, and cable combi-
nations, improper combinations can result in
an incomplete crimp. An incomplete crimp can
cause a fire.
• Do not use any worn or damaged dies with
this tool. A damaged or worn die can break and
strike nearby personnel.
• Keep your fingers and hands away from the
tool head during the operating cycle. Your
fingers or hands can be crushed, fractured, or
amputated if they become caught in the tool head
or between the tool head and other objects.
• One person must control work process and
machine operation. Only the operator should be
in the area when the tool is running.
• Large forces are generated during use that
can break or throw parts and cause injury.
Keep all unnecessary personnel away from work
area and wear appropriate PPE.
• Do not use on live electrical lines, this tool is
not insulated. When using this unit on or near
energized electrical lines, use proper personal
protective equipment.
• Proper set up is essential to minimizing risk
during use. Set up the tool and work area
according to these procedures to reduce the risk
of injury.
6
•
•
•

Greenlee Contact Information

If you have any questions, need to arrange service or
purchase parts or accessories for this Greenlee/HDE
product: Contact your local Greenlee distributor or
Greenlee's Customer Service Center.
Additional copies of this manual are available for
download at www.greenlee.com
Greenlee Customer Service
USA: 1-800-435-0786 | Canada: 800-435-0786
International: 1-815-397-7070
GRNCustomerService@emerson.com
Shipping address:
Greenlee Factory Service Center
4411 Boeing Dr., Rockford, IL 61109
© 2022 Greenlee Tools, Inc.
15 Ton Battery-Powered Crimping Tool
Use this equipment only in accordance with
these instructions, considering the working
conditions and the work to be performed. Use of
this equipment for operations different from those
intended could result in a hazardous situation.
Do not modify tool. Modifying the tool in any
manner may result in personal injury and voidance
of the tool's warranty. A head that has been welded,
ground, drilled or modified in any manner can break
during use. To reduce risk of injury, replace and
dispose of the whole damaged head, never indi-
vidual components.
Do not use hands to check for oil leaks. Oil under
pressure easily punctures skin. If injured, seek
medical attention immediately.
52080019 REV 05