Finishing The Installation - Hinkley 60 DRAFTSMAN Manual De Instrucciones

FINISHING THE INSTALLATION

Align the locking slots of the ceiling canopy with the two
1
screws in the mounting plate. Push up to engage the slots and
turn clockwise to lock in place. Immediately tighten the two
mounting screws firmly.
Install the remaining two mounting screws into the holes in the
2
canopy and tighten firmly.
Install the trim ring by aligning the ring's slots with the screws
3
in the canopy. Rotate the trim ring clockwise to lock in place.
Make sure the hook on the hanging bracket properly sits in the groove in the hanger ball
before attaching the canopy to the bracket by turning the housing until it drops into place.
Ceiling Fan
Outlet Box
Screw
WARNING:
Hanger
bracket
Canopy
©2022 Hinkley Lighting, Inc. hinkley.com
Trim Ring
9