Efapel 40226 Manual De Instrucciones página 18

3 STEP
RD
Click on the com-
mand button of the
Installation Key (Ref.
40925) in close prox-
imity to the 4-Gang
Push Button.
PAIRING OF THE DEVICES THAT ARE ALREADY IN A NETWORK -
ƒ ON THE 4-GANG PUSH BUTTON
1 STEP
ST
Click on PROG
(programming).
18
3.1 - The LED starts to
blink red, indicating
that it is searching for
the device that is going
to be added.
3.2 - The LED blinks
green and switches
off, the device's LED
OM switches off and
the A, B, D, C LEDs
switch on and off in
sequence, indicating
that the 4-Gang Push
Button was successfully
Note: If the Installation Key LED
does not turn green and switch
off, repeat from the 1 step.
st
ONLINE
1.1 - The LED A
switches on, indi-
cating that you can
start the PAIRING.