Operation Precautions
Usage and Care for Pruning Shear
1.
Do not cut branches beyond speci ed diameter indicated, do not cut hard items
such as metals, stones or any other non-plants materials. If the blades are worn or
damaged, please replace them.
2.
Keep the pruning shear clean; use a clean cloth to clean the pruning shear, battery
and charger (do not use any abrasive or solvent-based cleaning agent) use a soft dry
brush to clean the dust o the pruning shear head.
3.
Do not immerse the pruning shear, battery or charger in any liquid.
4.
Follow instructions as given for proper use of the pruning shear, do not use the
pruning shear when the tool itself, battery or charger are damaged.
5.
Do not use the pruning shear if it could not operate or shut down properly. Send for
servicing immediately. It is dangerous to use the pruning shear when the tool could
not operate or shut down properly.
6.
Please ensure the pruner is powered o during any adjustment, replacing accessories
or storage. This protective measure aims to reduce the risk of accidental pruner
activation.
7.
Please ensure the blades are closed when not in use, storage of the pruning shear
must keep out of reach of CHILDREN, do not allow any person, who is not familiar
with the pruner, to use the tool without instruction. It is dangerous to use the
pruning shear without proper training and understanding.
8.
To use the pruning shear must comply with instructions stated in this manual and
methods of use as well as taking in consideration of the working environment and
nature of work undertaken. The use of the pruning shear not within its stated
capability and speci cations is dangerous.
9.
Remove all dirt from the moving and xed blades after each use, thereafter apply
lubricant on the blade side where both moving and xed blade contact. This will
ensurethe blades are maintained in good conditions and reduce resistance during
use, prolonging the pruner and blades lifespan.
10
.
At the end of the work, always remove the battery and store the machine in a
safe place, out of the reach of children. The company declines all responsibility for
damage to things or people.
Usage and Care for Battery
1. Do not charge battery with ambient temperature below 32°F (0°C) or above
113°F (45°C).
2. Please ensure the battery is switched o before connecting the power cord
to the battery.
3. Only use battery charger supplied with the pruning shear, the use of any
other charger not matching to the speci cation of the battery may cause re.
4. Item such as paper clips, coins, keys, nails, screws or any other
conductive items must be keep away from battery when not in use.
26