Publicidad
English
No. Name
4
EDID AUTO
/
COPY / STD
5
SERVICE
port
6
DC 12V
IR Remote
Power on the product or set it to standby mode.
Output A (Output B)
Select input source signal to Out A port output,
the corresponding blue LED on the front panel
will illuminate.
Select the last or next input source signal to
OUT A port output, the corresponding blue LED
on the front panel will illuminate.
Turn on or off AUTO function. The Auto function
is turned on, if an or a few HDMI IN ports are
connected source device, Out A port will output
the signal from the last connected input source.
Select Out A 4k→1080P downscale fucntion.
For example, if source is 4K but TV only
supports 1080P, at this time the input resolution
with 4K will downscale to 1080P to TV output
Description
AUTO: Compare with Out A and Out B display device's
EDID information, and then sending the best EDID
information to source device of Out A and Out B. The
source device of Out A and Out B will send the EDID
information again to Out A and Out B display device
output.
COPY: Copy Out A display device's EDID information to
source device of Out A and Out B. Then the source
device of Out A and Out B will send the EDID information
again to Out A and Out B display device output.
STD: Out A and Out B display device output default 1080P.
Firmware update port.
Plug in 12V/1A adapter to AC wall outlet for power supply.
-4-
Publicidad
