Publicidad
English
Operation
1.
Press the button OUT A (OUT B) to change the video channel. The
corresponding image will be shown on the display device, and the LED
indicator will change accordingly.
Press the button for 3 seconds to switch the AUTO function on or off.
2.
Use the AUDIO button to select the audio signal OUT A / OUT B to the audio
outputs. If ARC is activated, you can use it to select the TV on OUT A or OUT
B as the audio source.
3.
Use the 4K->1080P button to activate downscaling for display A or display B.
4.
The ARC button switches the Audio Return Channel on or off. This selects
the TV sound for the optical audio output.
5.
You can set the EDID data with the switch on the back:
AUTO: The capabilities of OUT A and OUT B are compared.
COPY: Only the capabilities of OUT A are used.
STD: It is set as default that the output supports 4K 60Hz HDR and 5.1
sound.
When changing the EDID switch, please note that a reboot of the connected
devices may be necessary.
Support Delock
If you have further questions, please contact our customer support
support@delock.de
You can find current product information on our homepage: www.delock.com
Final clause
Information and data contained in this manual are subject to change without
notice in advance. Errors and misprints excepted.
Copyright
No part of this user manual may be reproduced, or transmitted for any purpose,
regardless in which way or by any means, electronically or mechanically, without
explicit written approval of Delock.
Edition: 09/2022
-7-
Publicidad
