Operating Temperatures; Important & Warning - IKEA SYMFONISK Serie Manual De Instrucciones

Model name:
Type number:
Operating
temperatures:
LED bulb:
Input:
Operating Frequency and Radio output power:
2402-2480 MHz – 3.45 dBm EIRP
2412-2472 MHz - 19.96 dBm EIRP
5150-5350 MHz – 20.16 dBm EIRP
5500-5700 MHz – 16.81 dBm EIRP
Deactivating or activating the wireless port:
In the Sonos app, go to: Settings > System > select
room > select product name > Select Disable/Enable
Wi-Fi.
Network Mode
Wired
Wireless**
*) Power consumption in "standby" is when audio
playback is inactive. SYMFONISK is a device with
HiNA function.
**) Wireless connectivity is automatically selected
to optimize your Sonos / IKEA system. Whether in
SonosNet (mesh) or wireless (group coordinator)
mode, the power consumption is the same.
For indoor use only
EMC compliance is met using shielded Ethernet/
CAT-5 cable.
Manufacturer: IKEA of Sweden AB
Address: Box 702, SE-343 81 Älmhult, SWEDEN
Save these instructions for future use.
SYMFONISK FL
E2136
0°C to 40°C
E26/E27, Max 15W
100-240VAC, 50/60Hz, 1.0A
Network Standby*
Power Consumption
<3 W
<3 W
IMPORTANT & WARNING!
• Too high volume can damage your hearing.
• The speaker is for indoor use only and can be
used in temperatures ranging from 0 ºC to 40 ºC.
• Do not subject the speaker to wet, moist or
excessively dusty environments, as this may cause
damage.
• The product contains small parts that may be
hazardous to small children.
• The product may present a tipping hazard (e.g. if
placed on an uneven surface).
• The product contains a long cord which could
present an entanglement hazard.
• Only use the product if it is properly assembled.
• Never use abrasive cleaners or chemical solvents
as this can damage the product.
• Different building materials and placement of the
units can affect the wireless connectivity range.
• Never install the product in a confined space.
Always leave a space around the product for
ventilation.
• The product shall not be exposed to excessive
heat such as sunshine, heat sources, and fire or
similar.
• No open flame sources, such as lit candles, should
be placed on the apparatus.
• Do not attempt to repair this product yourself, as
opening or removing screwed covers may expose
you to the risk of electric shock.
• Do not use an excessively worn or defective
power supply cord or cable when operating the
product.
• Do not put any objects or fingers into the lamp
socket.
• Do not use light sources with a power rating
above 15W.
5