HOGERT HT4M322 Instrucciones De Uso página 13

When using the device, the following information may appear in the main display area:
Information
B.L Low battery voltage
T.L The temperature is too low
T.H The temperature is too high
D.H Measurement data outside the range Repeat the measurement
S.L The signal is too weak
S.H The signal is too strong
H.F Device error
• Technical Data
Measurement range
Minimum unit
Measurement accuracy
Single measurement time
Measurement units
Laser class
Laser type
Laser power
Continuous distance measurement
Surface measurement
Volume measurement
Pythagorean measurements
Summary and subtraction of results
Maximum and minimum measurements
Memory of results
Measurement data handling switch
Backlighting
Buzzer
Battery type
Battery life
Operating temperature
Storage temperature
Laser closer
Automatic shutdown
Size
Adres producenta/ Adresse des Herstellers/ Manufacturer's Address/ Адрес производителя
GTV Poland Sp. z o.o. Sp. k., ul. Przejazdowa 21, 05-800 Pruszków
Cause
HT4M322
0.05-40 m
1mm
±2mm *
0.1~4 seconds
M(metre)/ft(foot)/in(inch)
Class II
620~670 nm
<1mW
Yes
Yes
Yes
Yes
Yes
Yes
30 measurements
Yes
Yes
Yes
AAA alkaline 1.5Vx2
Up to 5000 measurements
0°C~40°C
-20°C~60°C
After 15 seconds
After 120 seconds
120mm x 56mm x 27mm
Solution
Replace the battery
Warm up the device (in your pocket)
Cool down the machine
Repeat the measurement at another point
Repeat the measurement at another point
Restart. If the error repeats itself, contact
service
HT4M323
0.05-60 m
HT4M324
0.05-80 m
13