i-tec C31SMARTDOCKPD Manual De Instrucciones página 17

Notes on using the docking station with monitors:
• Working on a connected monitor while the Mac monitor is tilted is possible with mains
power (there is a partial limitation when using an HDMI monitor on older versions of
Mac). When battery power is applied, use of the HDMI monitor is limited by the Mac (in
some cases, the procedure in the following section can be used for display problems).
• Most of the problems with screen refresh on a connected monitor after putting the
Mac to sleep, after using the screensaver, after restarting the Mac, after turning the
Mac off/on can be solved by disconnecting the USB-C cable of the dock from the
USB-C port of the Mac and reconnecting it after about 10 seconds.
B: After connecting other USB devices to the USB 3.0 port of the docking station (USB
external HDD, USB keyboard, USB mouse, USB HUB, USB graphics adapter), these devices
are used in the standard way. In case the device does not charge or does not work, then
connect the original USB-C power adapter to the USB-C port of the docking station for
power support.
Most of the problems with the dock and connected peripherals can be solved by dis-
connecting the USB-C cable of the dock from the USB-C port of the PC/Mac/smart-
phone/tablet and reconnecting it after about 10s.
CHARGE
The docking station supports charging of connected USB mobile devices such as smart-
phones, e-book readers, media players, navigation devices and tablets. Simply connect the
device to be charged with the original cable to the USB port of the docking station. If the
device does not charge, then connect the original USB-C power adapter to the USB-C Power
Delivery port of the docking station to support charging.
Quick Start / C31SMARTDOCKPD/ English
17 EN