Technical Description; Status Led; Installation - Dometic Day/Night Controller Instrucciones De Montaje Y De Uso

Day/Night controller
4

Technical description

The controller can be controlled by either RTS protocol transmitters or push but-
ton inputs. It has two motor output channels.
The controller has a built-in self-resetting over current protection. The runtime for
the motor outputs can be adjusted to suit the application.
4.1

Status LED

LED
LED flashes red
LED lights up red
LED flashes green every second
LED flashes red/green every second Unit powered Up, relay outputs active
5

Installation

The electrical power supply must be connected by a qualified electrician who
has demonstrated skill and knowledge related to the construction and opera-
tion of electrical equipment and installations and has received safety training to
identify and avoid the hazards involved.
➤ Choose an accessible installation location to allow connection and setting of
the DIP switches.
➤ Mount the controller.
1
EN
Description
Reset signal during power up
Push button input active during power up
Unit powered up, relay outputs idle
Technical description
5