Connecting The Camera - DiO CAM-RE01-v2 Guia De Inicio Rapido

1. Connecting the camera

1 Connect the camera to the mains, making sure to push the cable home.
The red indicator light starts to flash. After a few seconds, you will hear a
beep. This indicates that the camera can be connected to WiFi via your
smartphone or tablet.
2 Download the free DiO One application and create your account.
The DiO camera are also compatble with the app "my Chacon"
3 Follow the instructions in the application to connect the camera to WiFi.
Make sure your WiFi network is available. Add the camera to the application
by clicking to the "+", choose the device to add and the select the way to
proceed (Scan QR code or smart configuration).
Note:
- This camera only supports 2.4GHz WI-FI network
(doesn't work with 5GHz)
- Make sure that the smartphone is well connected
to the right Wi-Fi network. When you have to register
the SSID, make sure you put the same Wi-Fi network
and the right password.
- A camera can only be added to one account. If the
camera has been already added, it cannot be added
on another account.
EN