Drying A Load Of Laundry - Avanti SED67D0W Manual De Instrucciones

DRYING A LOAD OF LAUNDRY

1. Power on your dryer.
•
2. Load your dryer.
•
•
Mixed loads of heavy and light weight fabrics will dry
differently, which may result in lightweight fabrics being
dry while heavy fabrics remain damp at the end of a
drying cycle.
•
Add one or more similar items to your dryer when
only one or two articles of clothing need drying. This
improves the tumbling action and drying efficiency.
•
Overloading restricts tumbling action, resulting in
uneven drying as well as excessive wrinkling of some
fabrics.
3. Select the appropriate cycle and options for the load.
4. Start your dryer.
Pressing START/PAUSE button will start the selected cycle.
To PAUSE cycle press START/PAUSE button then open the
door. To resume operation after closing the door always
press START/PAUSE. Opening the door during the operation
will instantly stop operation and will require to press START/
PAUSE button to resume operation.
Press this Power button to power your dryer on.
• The "Clean Filter" light in the process bar will
flash 10 times when your dryer is powered on
• You should clean the filter before the dryer is
loaded.
Place only one wash load in your dryer at a time.
•
Select the appropriate cycle by Cycle
Selector according to the cycle chart on
page 36.
•
Select the appropriate optional function
by buttons according to the chart on
page 36.
35