Monacor PA-1200R Manual De Instrucciones página 7

Ocultar thumbs Ver también para PA-1200R:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 14
5 Operation
5.1 Calling up Stored Stations
If no stations have been stored yet, please read the
next chapter 5.2 "Adjusting and Storing of a Station"
first.
1) Press the button ON (3) to switch on the tuner. The
frequency of the station last adjusted will then
appear in the display (1).
2) Press the FM/AM button (2) to choose the fre-
quency range in which the station is stored.
3) To select a stored station, select the number under
which the station has been stored with the numeri-
cal keys (5).
4) The stored station frequency is shown in the display
(1).
5) Adjust the desired volume with the volume control (6).
6) Switch off the tuner by pressing the button ON (3)
again.
5.2 Adjusting and Storing a Station
1) The tuner can be adjusted to the three frequency
ranges FM1, FM2, and AM: FM1 and FM2 for FM
reception and AM for AM reception. Use the FM/AM
button (2) to change the frequency range. The
selected frequency range is shown in the display
(1). Up to 6 stations can be permanently stored in
each of the three frequency ranges. Thus, a total of
18 stations can be stored.
2) The station frequency can be adjusted manually
with the buttons
and
cy can either be increased (by pressing the button
) or decreased (by pressing the button
by step. The frequency spacing for the FM range is
50 kHz, for the AM range 9 kHz.
All rights reserved by MONACOR
be reproduced in any form or by any means for any commercial use.
All manuals and user guides at all-guides.com
(4). The tuning frequen-
) step
®
INTERNATIONAL GmbH & Co. KG. No part of this instruction manual may
If these buttons are pressed for more than
2 seconds, the automatic station tuning is activated:
button
: automatic tuning forward,
button
: automatic tuning backward.
The tuning always goes to the next station.
3) If the desired station has been tuned, press a
numerical key (5) for more than 2 seconds. The
station frequency is then stored under this number
in the corresponding frequency range. The display
and the number of the station memory will
CH
appear at the right side of the display (1).
6 Specifications
Tuning frequency
FM: . . . . . . . . . . . . . . . . 87.5 – 108 MHz
AM: . . . . . . . . . . . . . . . . 522 – 1620 kHz
RF sensitivity
FM: . . . . . . . . . . . . . . . . 2.0 µV
AM: . . . . . . . . . . . . . . . . 4.5 µV
S/N ratio
FM: . . . . . . . . . . . . . . . . 60 dB
AM: . . . . . . . . . . . . . . . . 45 dB
Power supply: . . . . . . . . . . via the PA amplifier or the
Dimensions (W x H x D): . . 195 x 44 x 120 mm
Weight: . . . . . . . . . . . . . . . 800 g
Subject to technical change.
basic unit of the insertion
GB
7

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

17.0720

Tabla de contenido