Watts 957-FS Serie Instrucciones De Instalación

Installation Instructions
BMS Sensor Connection Kit
and Retrofit Connection Kit
Series 957-FS, 957RPDA-FS, LF957RPDA-FS
Series 994-FS, 994RPDA-FS
Series C400-FS, C500-FS, LFC500-FS
Series 4000SS-FS, 5000SS-FS
2 ⁄ " – 10"
1
2
WARNING
!
Read this Manual BEFORE using this equipment.
Failure to read and follow all safety and use infor-
mation can result in death, serious personal injury,
property damage, or damage to the equipment.
Keep this Manual for future reference.
WARNING
!
You are required to consult the local building and plumbing codes prior to
installation. If the information in this manual is not consistent with local
building or plumbing codes, the local codes should be followed. Inquire
with governing authorities for additional local requirements.
NOTICE
Use of the SentryPlus Alert
need to comply with all required instructions, codes, and regu-
lations related to the installation, operation, and maintenance of
the backflow preventer to which it is attached, including the
need to provide proper drainage in the event of a discharge.
Watts is not responsible for the failure of alerts due to
®
connectivity or power issues.
Monitor relief valve discharge with smart and connected
technology to detect and notify of flooding. The BMS Sensor
Connection Kit activates the integrated flood sensor to enable
functions that detect flood conditions. The BMS Sensor Retrofit
Connection Kit upgrades existing installations by integrating
and activating the flood sensor to enable functions for flood
detection. When excessive relief valve discharge occurs, the
flood sensor energizes a relay signaling flood detection and
triggers real-time notification of potential flood conditions
through the building management system, or BMS.
technology does not replace the
®
IS-FloodSensor-957/994/Colt/SS-BMS
Connection Kit
Retrofit Connection Kit