Assembling System Assembling - Optika Italy TB-3W Manual De Instrucciones

7. Assembling
7.1 System assembling
1. Remove the dust cover from camera and from projection
lens.
2. Screw the projection lens to the camera's thread. (Fig. 1)
3. Insert the bottom part of the projection lens into the empty
hole of the photo/tv exit. (Fig. 2)
4. Mount the tablet. Insert the pins ① placed on the camera
bracket into the holes ② placed on the tablet bracket and
gently push down until the connectors are properly locked.
(Fig. 3-4-5)
• You can select one of three sets of holes to position the tablet
at the desired height.
• To remove the tablet from the bracket, gently push up and
pull the connectors out of the bracket.
Page 6
②
①
F ig. 1 F ig. 1
F ig. 2 F ig. 2
F F ig. 3 ig. 3
F ig. 4 F ig. 4