connected to a water supply if water has
not been drawn for 5 days.
If the refrigerating appliance is left
–
empty for long periods, switch off,
defrost, clean, dry, and leave the door
open to prevent mould developing within
the
appliance.
–
Note::
The refrigerant gas contained in the
circuit of this appliance is isobutane
(R600a), a low-polluting but flammable
gas.
- When transporting and installing the
appliance, take care not to damage any
part of the refrigerant circuit.
- Do not use any sharp or pointed tools
to defrost the unit.
- Do not use any electrical appliances
inside the unit.
If the refrigeration system is damaged:
Do not use a flame near the appliance.
Avoid sparks - do not light any electrical
appliance or electric lamp.
Ventilate the room immediately