T'nB BTTRANSMITTER Modo De Empleo página 8

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 13
C) Switch on your Bluetooth® headset or speaker. After a few seconds, the pai-
ring will be complete and a beep will sound. If the operation does not succeed,
press (1). Make sure that the distance between BTTRANSMITTER and your
speaker is less than 10 metres.
D) Repeat the last step (C) to connect a second headphone/speaker simul-
taneously.
If your TV is not equipped with a jack port, you need to use the jack cable (6)
and the RCA cable (7).
Connect one of the two jack connectors (6) into the jack port (4) and the other
connector into the female jack port (7). Connect the two red and white RCA
connectors (7) into the ports of the same colour on your TV. Finally, simply
follow the steps (B) and (C) described above.
You can now enjoy your programmes on a Bluetooth® speaker or headset.
NOTES
The connection may be different depending on the Bluetooth® protocols. In
case of trouble connecting, please refer to the user manual of your Bluetooth®
device.
If the connection fails, turn off BTTRANSMITTER and restart.
If BTTRANSMITTER does not work properly:
- Make sure the product is switched on.
- Check if the battery is charged.
- Turn off and restart BTTRANSMITTER
- Check that the distance between your devices and BTTRANSMITTER is less
than 10 metres.
ICE_BTTRANSMITTER.indd 9
13/09/2018 17

Publicidad

Tabla de contenido
loading

Tabla de contenido