Control Buttons And Pedals - Gewa UP405 Guía Rápida

CONTROLS / TOUCHDISPLAY
4.2
Diagram A
on/off
volume
Touch Display
The touch display shows you all the settings and allows
you to control the piano by tapping directly on the screen.
Favorite sounds
Right after the startup, you have 4 Favourite Sounds at
your disposal. To select one of them, just quickly tap on
the respective button. By tapping and holding one of the
buttons, you can reassign it with a different sound.
1 Symbol bar
Provides access to all the functions of the piano.
2 Favorites
Provides a configurable selection of 4 frequently used
sounds.
3 Sounds
Provides access to all the sounds of the piano.
4 Player / Recorder
Provides access to the player and recorder functions.
5 Metronome
Provides access to the metronome.
6 Settings
Shows all the settings options.
7 on/off Switch
With this switch you turn your Piano on or off. Hold it down
11
for about 3 seconds to turn the piano off.
NOTE: The switch does not click into place. Do not apply
heavy force.
8 Volume fader
With the volume fader you determine the overall volume of
your piano.
NOTE: Before turning the piano on for the first time, it is
12
recommended to set this fader to the middle position.
FIRST STEPS
UP405
25