Technical Data - Flo 79734 Manual De Instrucciones

PRODUCT OVERVIEW
The verticutter is used for maintenance and care of the lawn. It is equipped with a roller with blades that cut the ground while
rotating. Cutting the soil on which the grass grows results in a better supply of air and water. The second roller has hooks that
remove the excess moss and grass from the lawn surface. The electric drive allows for quiet, effi cient and easy operation. Proper,
reliable and safe operation of the device depends on appropriate use, that is why you should
Read this entire instructions manual before the fi rst use and keep it for future reference.
The supplier shall not be held liable for any damage or injury resulting from improper use of the product, failure to observe the
safety regulations and recommendations of this instructions manual. Use of the product for purposes other than those for which it
was intended shall cause the loss of the user's rights to the warranty and statutory warranty.
PRODUCT EQUIPMENT
The product is delivered complete; however, the preparatory actions described in the further part of this instructions manual must
be carried out before starting work. The product is only supplied with a short section of the power cord.

TECHNICAL DATA

Parameter
Catalogue No.
Rated voltage
Rated frequency
Rated power
Working width
Max. working depth
Rated rpm
Noise level
sound pressure L ± K
pA
sound power L ± K
wA
Vibration level a ± K
h
Electric insulation class
Protection rating
Weight
Grass catcher capacity
The declared total vibration emission value and declared noise emission value have been measured using the standard test
method and can be used to compare one tool to another. The declared total vibration emission value and declared noise emission
can be used in the initial exposure assessment.
Caution! The vibration emission during tool operation may diff er from the declared value, depending on the manner the tool is
used.
Caution! Safety measures to protect the operator, which are based on an assessment of emission exposure under actual condi-
tions of use (including all parts of the work cycle, such as the time when the tool is switched off or idle and the activation time),
must be specifi ed.
INSTRUCTIONS FOR SAFE USE OF SCARIFIERS / AERATORS
Safe operation practices for scarifi ers / aerators
Training
Read the instructions manual carefully. Familiarise yourself with the controls and proper use
of the equipment.
O R I G I N A L
14
EN
Unit
[VAC]
[Hz]
[W]
[mm]
[mm]
[min ]
-1
[dB(A)]
[dB(A)]
[m/s 2 ]
[kg]
[l]
IMPORTANT!
READ CAREFULLY BEFORE USE
KEEP FOR FUTURE REFERENCE
I N S T R U C T I O N S
Value
79734
230-240
50
1500
320
12
3000
84.50 ± 3.0
97.30 ± 1.05
4.265 ± 1.5
II
IPX4
9.3
30