Zeiss Supreme Prime Manual De Instrucciones página 5

Modification, Service and Repair
GB
You are allowed to do the following modifications: Changing the mount,
changing the external socket, adjusting the flange focal distance, switching
the scale ring and updating the firmware. Please follow the instructions on
our website: www.zeiss.com/cine/manuals
Do not undertake any other unauthorized modifications or repairs on the
product yourself. By disassembling it, damage may be caused which is not
covered by the warranty. lf it needs repair, please contact your authorized
dealer and distributor. For this purpose, see www.zeiss.com/cine/service
8
European Directive of Regulation
When the product left the factory it was in a completely safe working
condition. It meets the electromagnetic compatibility requirements set out
in Directive 2014/30/EU and bears the CE test mark.
Disposal
Do not dispose of the product as household waste but please follow the
applicable statutory regulations of the relevant country. Consult local
authorities about the options for disposal and recycling if necessary.
Warranty
The product is subject to the statutory warranty of 12 months.
Damage to or problems caused by the unauthorized opening of the product
are not covered by the warranty. Before submitting a warranty claim, make
sure that the possibility of an operator error has been ruled out. Please refer
to the support information in this regard at www.zeiss.com/cine
GB

N1807
9