Accesorios - Buchi FatExtractor E-500 Manual De Instrucciones

14 | Anexo

14.2.3 Accesorios

96/100
Conversion kit from HE to ECE PTFE
Includes 6 Extraction glass chamber ECE (11062499), 6 beaker (3 x 11067474), 6 be-
aker brackets (2 x 11067828), set of draining tubes for ECE (11067479) and a cham-
ber rack (11067077), , E-X00 seals, PTFE
Holder for glass sample tubes, stainless steel
Holder for glass sample tubes, PTFE
Holder for extraction thimbles (diameter 25 - 43
mm)
Extraction beaker carrier
Allows to carry 6 beakers (11067474)
Extraction beaker HE carrier
Allows to carry 6 beakers HE (11067475)
Set condenser insulations E-500, 6 pcs.
The insulation of the condensers prevent condensing water
and is recommended in high humidity environment
Set insulation cooling water hoses
The insulation of the water hoses prevent condensing water
and is recommended in high humidity environment.
Support solvent supply
Allows to fix the tubes of solvent dispensers to the conden-
sers for convenient solvent addition.
Cooling water valve. 24VAC
Valve opens cooling water feed during distillation. Meant to
be used with a vacuum controller/interface.
Extension cable for the cooling water valve, 2 m
Turning disk
Allows for turning the instrument for easier access.
Büchi Labortechnik AG
N.º de pedido
11067219
11067220
11068443
11067042
11067493
11069078
11069079
11068306
031356
11069477
11067985
Manual de instrucciones FatExtractor E-500
N.º de
pedido
11073685
Figura