Switch; Switch Lock; Direction Of Rotation; Variable Speed - Promaker PRO-TI12KIT Manual Del Usuario

7.4 Switch

The drill is started and stopped by depressing and releasing the ON/OFF switch
trigger (7).
This cordless drill is equipped with an electric brake, when the ON/OFF switch
trigger 7 is released completely the chuck stops immediately.

7.5 Switch lock

The switch trigger can be locked in the center position.
This helps to reduce the possibility of accidental starting when not in use. To lock
the switch trigger, place the direction of rotation selector in the center position.

7.6 Direction of rotation

Direction of rotation is controlled by the direction of rotation selector (6) located
above the switch trigger.
To select forward rotation, release the on/off switch and push the forward/reverse
lever to left side of the tool. To select reverse rotation, push the lever to right side
of the tool. When the selector is in center position, the switch trigger is locked.
Clockwise rotation:
To select forward rotation, release the on/off switch and push the forward/reverse
lever to right side of the tool
Anticlockwise rotation:
To select reverse rotation, push the lever to left side of the tool. When the selector
is in center position, the switch trigger is locked and the machine cannot be
switched on.

7.7 Variable speed

This tool has a variable speed switch that delivers higher speed and torque with
increased trigger pressure. The rotational speed is controlled by the amount of
switch trigger depression.
9