Replacing The Belt - 1byone Audio-Technica AT3600 Manual Del Usuario

2. Lift the stylus up until you hear a click.
EN
DE
FR
ES
IT
3. Make sure there is no gap between the headshell and the cartridge.

Replacing the Belt

• The belt is a consumable part. Replace the belt if the speed of playback slows down
or irregular rotation occurs. As a rule of thumb, we suggest replacing the belt once a
year.
• Before replacing the belt, be sure to disconnect the product's AC adapter from the
outlet.
1. Remove the slip mat.
14
2. Remove the belt from the motor pulley.
3. Remove the main platter and then remove the old belt.
4. Turn the platter over and you will see a raised circle. Loop the new belt along
the middle circle.
15
EN
DE
FR
ES
IT