Publicidad
Idiomas disponibles
Idiomas disponibles
Step
Action
6
Remove the 3 bolts from the bottom flange on the
left side of the machine.
Tool:
6 mm Allen key
Note:
Dismantling by at least 2 people is recommended.
Take apart the two halves of the mixing barrel.
Attention:
7
Be careful not to damage the safety ring.
Note:
Dismantling by at least 2 people is recommended.
8
After cleaning, reassemble the mixing barrel in
reverse order.
When assembling, make sure that the sealing
9
surfaces are carefully cleaned. This ensures that the
mixing system is properly sealed again.
When assembling the mixing barrel, it is advisable to
10
moisten the bolts with a little oil so that they can be
loosened more easily later.
11. Maintenance
11.1. General safety information
DANGER
Risk of personal injury and property damage!
For safety reasons, the power plug must be pulled out of the socket before any work is
carried out on the machine!
45 / 191 - EN -
Illustration
Publicidad
