Functions Of The Chimney Hood; Control Panel; Symbols Functions - ROMMER P661 Manual De Instrucciones

Twists and bends on the aluminum pipe may cause minimizing the air suction
so avoid unnecessary bends and twists as much as possible. (Figure 7-8)
Place the inner duct and outer duct carefully on the product. Fix the inner
duct to inner duct connection plate with 2 screws. (Figure 9)
Figure 7

5. FUNCTIONS OF THE CHIMNEY HOOD

5.1. Control Panel

Digital Control: Touch the symbols on the keys. (On/Off function and timer
are on the same key; if pressed for 1 sec on-off function will operate.If
pressed for 3 sec. 15 minutes timer will operate.
Touch Control: Touch the symbols on the glass surface. If Press a symbol
longer (more 3 sec) may operate various functions.

5.2. Symbols Functions

Switches on and off the motor.
(Except for the lighting)
Decreases the speed when the motor
is running.
Display
Note: When the product operates for a certain time, the aluminum filters
get dirty and the digital display shows "C" Clean sign. This means the fil-
ters should be cleaned. Press the speed reduction key for 5 secs in order
to delete "C" sign from the display.
GB
Figure 8
Increases the speed when the motor
is running.
If pressed this symbol, the motor
turns itself off 15 minutes later.
Only switches on and off the lighting
system.
10
Figure 9