ARDES AR6S05A Instrucciones Para El Uso página 10

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

The appliance contains a Lithium rechargeable battery (type 14500 Li-ion 3,7V 500mAh).
Remove the batteries from the appliance before its disposal, following these instructions:
Note: these operations shall be conducted by a qualified technician:
1.
The appliance must be disconnected from the supply mains when removing the battery;
2.
Make sure that the batteries are full discharged (the light for night use will not be able to lights on).
3.
Unscrew the torch from the racket.
4.
Remove screws of the torch and open it.
5.
Cut the battery cables.
WARNING, CUT ONE CABLE AT A TIME. CABLES MUST NON TOUCH TOGETHER.
6.
Remove the battery.
7.
Dispose the battery and the appliance as described it the DISPOSAL section.
Switch off the appliance before carrying out any cleaning and maintenance operations.
Unscrew the torch from the racket.
For the cleaning of the electrified grid use a suitable insulated small brush.
Carry out this operation approximately every 15 days. Do not use petrol, alcohol, insecticide or any other
chemical product to clean the appliance. Do not use any substances, liquids or excessively wet cloths;
in the case of any infiltration into the appliance, it could cause irreparable damage.
NEVER IMMERSE THE APPLIANCE IN WATER.
PACKAGING
In order to respect the environment, packaging material must be disposed of properly in accordance
with separate collection.
Check local regulations.
BATTERIES - Remove the batteries from the appliance before its disposal. Do not
dispose the batteries with domestic waste. The batteries must be disposed of in the
appropriate containers or in the specific collecting centre. Suitable segregated collection
helps prevent damage to the environment and to human health.
To remove batteries, refer to USER INSTRUCTIONS.
USER INFORMATION
"Implementation of Directive 2012/19/EU on Waste Electrical and Electronic Equipment
(WEEE)", pertaining to reduced use of hazardous substances in electrical and
electronic equipment, as well as to waste disposal".The symbol of the crossed-out
wheelie bin on the equipment or on its packaging indicates that the product must be disposed of
separately from other waste at the end of its service life.
The user must therefore take the dismissed equipment to suitable separate collection centres for
electrical and electronic waste.
For more details, please contact the appropriate local authority.
Suitable segregated collection of the equipment for subsequent recycling, treatment or environmentally-
friendly disposal helps prevent damage to the environment and to human health, and encourages the
re-use and/or recycling of the materials that make up the equipment.
Abusive disposal of the product by the user shall result in the application of administrative fines in
accordance with the laws in force.
Terms and Conditions
(EN) MAINTENANCE
(EN) DISPOSAL
(EN) GUARANTEE
10 / 28

Publicidad

Tabla de contenido
loading

Tabla de contenido